DRY SLIDING WEAR BEHAVIOUR OF CARBONATED FLY ASH FILLED COMPOSITE

Authors

  • Itishree Rout Veer Surendra Sai University of Technology (VSSUT) Odisha
  • Dr. Trupti Ranjan Mahapatra Veer Surendra Sai University of Technology (VSSUT) Odisha
  • Dr. Sanjukta Sahoo Department of Civil Engineering, KIIT Polytechnique, KIIT (deemed to be university), Odisha, India
  • Dr. Debadutta Mishra Veer Surendra Sai University of Technology (VSSUT) Odisha

DOI:

https://doi.org/10.52292/j.laar.2022.880

Keywords:

Mineral Carbonation, Carbonated fly ash, GFRP Composite, Pin-on disc wear test, Taguchi experimental method, Optimization

Abstract

Carbon Capture and Storage (CCS) has appeared as an efficient approach to alleviate the intimidating effect of the growing concentration of CO2. Recently, Fly-ash (FA), which is an industrial alkali residue and rich in metal oxides, has been proven as one of the potential agents for CCS through mineral carbonation. In this research, an attempt has been made to sequester CO2 by using FA via chemical activation technique and subsequently use this FA after carbonation (Carbonated Fly Ash (CFA)) as filler materials to fabricate a new class of glass fiber reinforced polymer (GFRP) composite. Further, the dry sliding wear properties (Pin-on disc) of these CFA composites are investigated at room temperature according to Taguchi design of experiment and the effect of diverse control factors are deliberated. The ANOVA revealed that the applied normal load and weight% of CFA significantly affect the wear rate of the presently developed CFA composites.

Author Biographies

Itishree Rout, Veer Surendra Sai University of Technology (VSSUT) Odisha

PhD Scholar,

Department of Production Engineering,

VSSUT, Burla, India

Dr. Sanjukta Sahoo, Department of Civil Engineering, KIIT Polytechnique, KIIT (deemed to be university), Odisha, India

Assiatant Professor and Head

Department of Civil Engineering, KIIT Polytechnique,

KIIT (deemed to be university), Odisha, 751024 India

Dr. Debadutta Mishra, Veer Surendra Sai University of Technology (VSSUT) Odisha

Professor and Dean (Academics)

Department of Production Engineering,

Veer Surendra University of Technology, Odisha, 768018 India

 

Downloads

Published

2022-09-25

Issue

Vol. 52 No. 4 (2022): Latin American Applied Research

Section

Applied Chemistry

License

Copyright (c) 2022 Latin American Applied Research - An international journal

Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Once a paper is accepted for publication, the author is assumed to have transferred its copyright to the Publisher. The Publisher will not, however, put any limitation on the personal freedom of the author to use material from the paper in other publications. From September 2019 it is required that authors explicitly sign a copyright release form before their paper gets published. The Author Copyright Release form can be found here